A Comprehensive Study of Hydrolyzed Polyacrylamide as a Binder for Silicon AnodesA Comprehensive Study of Hydrolyzed Polyacrylamide as a Binder for Silicon Anodes

A Comprehensive Study of Hydrolyzed Polyacrylamide as a Binder for Silicon AnodesA Comprehensive Study of Hydrolyzed Polyacrylamide as a Binder for Silicon Anodes

TitleA Comprehensive Study of Hydrolyzed Polyacrylamide as a Binder for Silicon AnodesA Comprehensive Study of Hydrolyzed Polyacrylamide as a Binder for Silicon Anodes
Publication TypeJournal Article
Year of Publication2019
AuthorsAndrea Miranda, Xiaoyi Li, Atetegeb Meazah Haregewoin, Kasturi Sarang, Jodie Lutkenhaus, Robert Kostecki, Rafael Verduzco
JournalACS Applied Materials & Interfaces
Volume11
Issue47
Pagination44090 - 44100
Date Published10/2019
ISSN1944-8244
Abstract

Silicon anodes have a high theoretical capacity for lithium storage, but current composite electrode formulations are not sufficiently stable under long-term electrochemical cycling. The choice of polymeric binder has been shown to impact stability and capacity of silicon anodes for electrochemical energy storage. While several promising polymeric binders have been identified, there is a knowledge gap in how various physicochemical properties—including adhesion, mechanical integrity, and ion diffusion—impact electrochemical stability and performance. In this work, we comprehensively investigate the physical properties and performance of a molecular-weight series (3–20 × 106 g/mol) of partially hydrolyzed polyacrylamide (HPAM) in silicon anodes. We quantify the mechanical strength, electrolyte uptake, adhesion to silicon, copper, and carbon, as well as electrochemical performance and stability and find that HPAM satisfies many of the properties generally believed to be favorable, including good adhesion, high strength, and electrochemical stability. HPAM does not show any electrolyte uptake regardless of any molecular weight studied, and thin films of mid- and high-molecular-weight HPAM on silicon surfaces suppress lithiation of silicon. The resulting composite electrodes exhibit an electrochemical storage capacity greater than 3000 mAh/g initially and 1639 mAh/g after 100 cycles. We attribute capacity fade to failure of mechanical properties of the binder or an excess of the solid electrolyte interphase layer being formed at the Si surface. While the highest-molecular-weight sample was expected to perform the best given its stronger adhesion and bulk mechanical properties, we found that HPAM of moderate molecular weight performed the best. We attribute this to a trade-off in mechanical strength and uniformity of the resulting electrode. This work demonstrates promising performance of a low-cost polymer as a binder for Si anodes and provides insight into the physical and chemical properties that influence binder performance.

DOI10.1021/acsami.9b13257
Short TitleACS Appl. Mater. Interfaces
Refereed DesignationRefereed